Buyer
Dental High Speed and Low Speed Handpiece Kit 2 Hole/4 Hole USA
High & Low Speed Handpiece Kit Specification: High speed handpiece Description: Standard Push button type, high speed handpiece, Single-way water spray Needle Change Type Push button Air Pressure 180~250 KPa (1.8~2.5 kgf/cm2) Water Pressure 198Kpa (2 kg) Rotation Speed 370,000-420,000 rpm Head Hight 13.14 mm Head Diameter φ11.2 mm Bur Applicable φ1.59mm~φ1.6mm×21mm~23mm (diameter×length) Noise ≤70dB Low speed kits Features:- E-type connector- Wrench type- Precise technology, Steady, no vibration while revolving, offering a steady operation.- Suitable for any E-type handpiece accords with ISO standard- 135°C Autoclavable, suitable for both steam and chemical autoclave Contra angle handpiece- Low Speed 22,000-27,000 rpm.- The shank of the instrument mounted therein is 2.35 mm- Fastening of the instruments with a turning latch- Autoclavable 135°C- For any lab or E-type motors Straight Nosecone- Working pressure: 0.3MPa ;- 0.25MPa (Measure meter is installed at the end of air motor to measure the air pressure).- Revolution: about 22000-27000r/min (adjustable between clockwise or anticlockwise)- Noise: ≤68dB- Air consumption: about 56L/min- Ratio: 1:1- Max speed of contra angle: 25000rpm/min. Air Mortor – Supply air pressure: 245-392KPa (2.5-4kgf/CM2)- 1:1 Direct Drive- 2/4 Hole – Max speed 20,000 min-1 Specifications Air-in Pressure(kg/c㎡) Motor Rotation(rpm) Air Wastage:(N1/min) 2.5 22,000 42 3 25,000 51 4 27,000 72 Packing List:- High speed handpiece push button 2/4 Holes : 2 each- E-type air motor 2/4 Holes: 1 each- Straight nose cone: 1 each- Contra Angle handpiece: 1 each- Water spray nozzle: 1 each- Oil spray nozzle: 1 each- CAP Spanner: 2 FDA Statement：The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatry agencies.If so, you can bid on this item only if you are an authorized purchaser.If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.Seller name:allguestCity,State:SHENZHEN,ChinaTelephone number:0755-58772369 Payment We accept PayPal Only! All payments must be made within 7 days after the auction ends. Non-paying bidders will be reported to eBay. Please don’t buy an item if you can’t/won’t pay for it. Paypal is the easiest way to pay for items on eBay. Please make sure your Paypal and eBay accounts have the same physical address used for delivery and the same e-mail address to ensure payment confirmation.Shipping: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Return If the item you received is damaged or defective,Please message to us immidately.We will free exchange or refund.We will pay the return shipping costs if the product is defective or the return is a result of our error. If the item is returned for any other reason you are responsible for the return shipping charges.You can return your purchase for up to 15 days from the date of delivery. No refund will be issued if the product shows signs of use. Returned package must be in the original packaging, everything must be in new condition, No missing parts.Our guarantee does not cover accidental damage or wear of product caused by customer.Thank you very much for your understanding! Shipping The goods you odered will be posted out in the second working day after the paymet has been made. (We will inform you via email if any delay occured due to holiday events. General shipping time is between 7-12 working days. (After the shipping started, the order will be monitored and the track of the item will be posted on paypal. Feedback You feedback is VERY important to usPlease leave us positive feedback, an positive feedback will be automatically left for you once we receive your full payment. Please leave us with any concerns prior to leave negative feedback, as we can only correct issues when we are aware of them. We understand the concerns and frustrations you might have, and will try our best to resolve the isuues. Serivce is our #1 priority at BAISTRA!If you message us immediately after placing the order, we will make every effort to assist you with your change request. Unfortunately, we can not make changes or cancel an order once it has shipped. We offer the best items at the best prices. We strive to exceed all your expectations and put a smile on your face. Your experience will be a pleasant and effortless one when you buy at BAISTRA. We stand behind our products and pride ourselves on OUTSTANDING customer service. We guarantee that you will be delighted with your purchase or we will gladly and promptly issue you a refund or make things right!
NSK Style Dental Shadowless Pana Max High and Low Speed Handpiece Kit 2 /4Hole
Dental High & Low Speed Handpiece Kit High speed handpiece Description: Standard Push button type, high speed handpiece, Single-way water spray Needle Change Type Push button Air Pressure 180~250 KPa (1.8~2.5 kgf/cm2) Water Pressure 198Kpa (2 kg) Rotation Speed 370,000-420,000 rpm Head Hight 13.14 mm Head Diameter φ11.2 mm Bur Applicable φ1.59mm~φ1.6mm×21mm~23mm (diameter×length) Noise ≤70dB Low speed kits Features:- E-type connector- Wrench type- Precise technology, Steady, no vibration while revolving, offering a steady operation.- Suitable for any E-type handpiece accords with ISO standard- 135°C Autoclavable, suitable for both steam and chemical autoclave Contra angle handpiece- Low Speed 22,000-27,000 rpm.- The shank of the instrument mounted therein is 2.35 mm- Fastening of the instruments with a turning latch- Autoclavable 135°C- For any lab or E-type motors Straight Nosecone- Working pressure: 0.3MPa ;- 0.25MPa (Measure meter is installed at the end of air motor to measure the air pressure).- Revolution: about 22000-27000r/min (adjustable between clockwise or anticlockwise)- Noise: ≤68dB- Air consumption: about 56L/min- Ratio: 1:1- Max speed of contra angle: 25000rpm/min. Air Mortor – Supply air pressure: 245-392KPa (2.5-4kgf/CM2)- 1:1 Direct Drive- 2 Hole – Max speed 20,000 min-1 Specifications Air-in Pressure(kg/c㎡) Motor Rotation(rpm) Air Wastage:(N1/min) 2.5 22,000 42 3 25,000 51 4 27,000 72 Packing List:- High speed handpiece push button 2 Holes : 2 each- E-type air motor 4-Holes: 1 each- Straight nose cone: 1 each- Contra Angle handpiece: 1 each- Water spray nozzle: 1 each- Oil spray nozzle: 1 each- CAP Spanner: 2 Shadowless Dental High & Low Speed Handpiece Kit ： High speed handpiece Features: 1.Low noise,Standard head 2.Stainless body,durable,maintain stability3.Single water spray, LED handpiece integrate E-generator 4.Unique electric generator, just a little air can generate sufficient power5.135°C Autoclavable 6.Ring LED lamp,shadowless lighting ensures brightness at all preparation area7.The world dental chair two holes, four holes8.Warranty:Six months Technical : Chuck Type: Push Button Working pressure: 0.25 Mpa to 0.3 MpaSpeed: 280,000-350,000R.P.MBur size：Φ1.595-Φ1.600mm Noise: ≤ 68 dBHole: 2 Holes / 4 HolesBEARING: Ceramic bearing Low speed kits 1.External water spray 2.Short motor 3.Reducing size and weight 4.Updated to an integrated design in response to modern demands.Shorter and lighter than precious models. Its shorter, lighter air motor gives optimal balance, reducing stress and fatigue during treatments and enabling you to focus on the procedure at hand 5.More comfortable to use Technical： Gear ratio：1:1 direct drive Chuck Type：Push button Air pressure:0.25-0.3MPA Bur applicable:Ø2.35mm Rotation speed:20,000rpm Noise:≤70dB ISO E-TYPE Connect 135°C Autoclavable 4 /2Hole Air motor Packing List: High speed handpiece*2 Contra Angle*1 Straight nose cone*1 Air motor *1 External water pipe*1 Oil spray nozzle* Wrench*2
NSK Style Dental Pana Max High low Speed Handpiece 2/4 Hole Air Turbine kit
Description： High speed handpiece Chuck Type：Push button Single way water spray Stainless steel bearings Head Size:Ø10.6 *H10.6 mm Bur applicable:Ø 1.59mm-Ø1.6mmx21mm-23mm Air Pressure：0.25-0.3 MpaWater pressure：0.25-0.3 Mpa Rotor Speed：380,000-420,000 rpm Noise:≤70dB 4 holes or 2 holes optional 135°C Autoclavable Low speed kits External water spray Technical： Gear ratio：1:1 direct drive Chuck Type：Latch contra angle Air pressure:0.25-0.3MPA Bur applicable:Ø2.35mm Rotation speed:20,000 rpm Noise:≤70dB ISO E-TYPE Connect 135°C Autoclavable 4 /2Hole Air motor Color：Pink Packing List: High speed handpiece*2 Contra Angle*1 Straight handpiece*1 Air motor *1 Oil nozzle Oil bottle Wrench External water pipe
NSK Pana Max Style Dental LED High Low Speed Handpiece Kit Contra Angle 2/4Hole
Low speed handpiece kit 2/4h Description： 1.External water spray 2.Short motor 3.Reducing size and weight 4.Updated to an integrated design in response to modern demands.Shorter and lighter than precious models. Its shorter, lighter air motor gives optimal balance, reducing stress and fatigue during treatments and enabling you to focus on the procedure at hand 5.More comfortable to use Technical： Chuck Type：Push button Noise:≤70dB Air pressure:0.3MPA Bur applicable:Ø2.35mm Rotation speed:20,000rpm ISO E-TYPE Connect 4 /2Hole Air motor Warranty:Six months Package: Contra angle*1 Straight handpiece*1 Air motor*1 External Water pipe*1 Oil nozzle*1 English Operation Manual*1 LED E-generator High Speed Handpiece Features: 1.Low noise,Standard head 2.Triple water spray, LED handpiece integrate E-generator 3.4-Hole/2-Hole Push Button system 4.Unique electric generator, just a little air can generate sufficient power 5. 135°C Autoclavable 6. For the LED bulb, continuous use of up to ten thousand hours, don’t need to change the pipeline, easy to use; The world dental chair two holes, four holes. 7.Warranty:one year for handle; three months for cartridge Technical : Chuck Type: Push ButtonWorking pressure: 0.25 Mpa to 0.3 MpaSpeed: 280,000-350,000R.P.MSpray: Three water SprayBur size：Φ1.595-Φ1.600mm Noise: ≤ 70 dB Hole: 2/4 HolesBEARING: Stainless steel bearing Packing List Handpiece *1 wrench *1 Operation manual *1 Statement “The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If so, you can bid it on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item” Payment We accept PayPal and bank wire transfer. All payments must be made within 7 days after the auction ends. Non-paying bidders will be reported to eBay. Please don’t buy an item if you can’t/won’t pay for it. Paypal is the easiest way to pay for items on eBay. Please make sure your Paypal and eBay accounts have the same physical address used for delivery and the same e-mail address to ensure payment confirmation.Shipping: Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility. Return If the item you received is damaged or defective, Please tell us immidately. We will free exchange or refund.We will pay the return shipping costs if the product is defective or the return is a result of our error. If the item is returned for any other reason you are responsible for the return shipping charges.You can return your purchase for up to 15 days from the date of delivery. No refund will be issued if the product shows signs of use. Returned package must be in the original packaging, everything must be in new condition, No missing parts.Our guarantee does not cover accidental damage or wear of product caused by customer.Thank you very much for your understanding! Shipping The goods you ordered will be posted out in the second working day after the payment has been made. (We will inform you via email if any delay occurred due to holiday events.General shipping time is between 7-12 working days. (After the shipping started, the order will be monitored and the track of the item will be posted on paypal. Feedback You feedback is VERY important to us.Please leave us positive feedback, an positive feedback will be automatically left for you once we receive your full payment. Please leave us with any concerns prior to leave negative feedback, as we can only correct issues when we are aware of them. We understand the concerns and frustrations you might have, and will try our best to resolve the issues. About Us Service is our #1 priority at BAISTRA!If you tell us immediately after placing the order, we will make every effort to assist you with your change request. Unfortunately, we can not make changes or cancel an order once it has shipped.We offer the best items at the best prices. We strive to exceed all your expectations and put a smile on your face. Your experience will be a pleasant and effortless one when you buy at BAISTRA. We stand behind our products and pride ourselves on OUTSTANDING customer service. We guarantee that you will be delighted with your purchase or we will gladly and promptly issue you a refund or make things right!
AZDENT 5pcs Dental Fresas de diamante FG Burs Fit for High Speed Handpiece
Feature: Dental Diamond Burs is an important part of the dental drill.It consists of the needle and needle handle. 1.Each single box includes 5 burs of the same type. you can choose what you want. 2. It is very easy to use, conveniently, and hygiene. 3. Flat-end Tapered type. 4. the head of Diamond Burs contain a large of sand, and coverage widely. 5. Rigidity, sharpness and wear. 6. Excellent quality and reasonable price. Package Including: 5pcs Diamond Burs per Pack. Attention: If there’s no message left about the burs types for 24 hours, the item will be shipped according to the most popular types, thank you! TF means Taper Flat End. TR means Taper Round End. TC means Taper Conical End. FO means Flame Ogival End. SF means Straight Flat End . SO means straight Ogival End. SR means straight round End. EX means special(extra) shape. RS means rounded shoulder. BR means ball Round. BC means Ball collar Type. DI means Double Inverted Cone. SI means Single inverted Cone. WR means wheel Round Edge. CR means inlay preparation CD means Childern’s dentistry. S means short shank . SS means super short shank. C means coarse. F means fine. EF means extra fine. CD polishing.100 TYPES for your CHOICE Standard BR-31 EX-12 TC-11 TR-19 BR-40 EX-20 TC-26 TR-20 BR-41 EX-21 TF-11 TR-21 BR-45 EX-26 TF-12 TR-24 BR-46 EX-31 TF-13 TR-25 BR-49 EX-41 TF-14 TC-21 BC-31 WR-13 TF-20 FO-11 BC-42 SF-11 TF-21 FO-21 BC-43 SF-12 TF-22 FO-25 SI-45 SF-13 TF-23 FO-27 SI-46 SF-21 TF-31 FO-32 SI-47 SF-31 TR-11 SO-20 SI-48 SF-41 TR-12 SO-21 DI-41 SR-11 TR-13 RS-11 DI-42 SR-12 TR-14 EX-11 SR-13 TR-15 Coarse Fine Extra Fine Short Shank BR-31C EX-18F TC-11EF BR-S45 WR-13C EX-21F TC-21EF BR-S46 SF-12C TC-11F TF-12EF TR-S21 TC-11C TC-21F CR-11EF TC-S21 TF-13C TF-12F TR-11EF TR-13C TF-21F TR-13EF TR-62C CR-22F TR-25EF SI-47C TR-11F EX-21EF FO-32C TR-13F FO-21EF FO-54C TR-26F FO-22EF FO-30F FO-40EF FO-21F CD-52F FDA Statement：The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatry agencies.If so, you can bid on this item only if you are an authorized purchaser. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item. Seller’s name: 2013eshop01 City: Shenzhen State: Gunagdong.ChinaTelephone number:0755-83162399
AZDENT Dental FG Diamond Burs Composite/Polishing Kit for High Speed Handpiece
Feature: FG Diamond Burs Size Available: FG-101 FG-102 FG-103 FG-104 FG-105 FG-106 FG-107 FG-108 FG-109 FG-110 FG-111 FG-112 FG-113 FG-114 FG-115 FG-116 FG-117
FG557 Carbide Burs Beavers Dental (100-10 Pack) Flat End Cross Cut Fissure
Normal 0 false false false EN-US X-NONE AR-SA Genuine High Quality Carbide Burs. Kerr brand • Carbide Burs FG 557 • Made by Kerr • Qty: Optional (100-20-10 pc) Friction grip shank used with high speed hand piece, flat end cylinder crosscut, , Made in Canada The carbide burs provide the highest combination of precision ground cutting edges for consistent cutting performance The burs adhere to stringent QA standards to ensure strength, performance and durability. PRODUCT DESCRIPTION FG557 Carbide Burs FG557 Friction Grip Kerr Made in Canada 100 burs (STRAIGHT FLAT END X-CUT FISSURE) ISO No. ISO Ø 1/10 (mm) Head Length (mm) Shank Type Dia/Length(mm) 557 010 3.7 Friction Grip DISCLAIMER: “The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.”
Beavers FG1/2 Carbide Burs FG 1/2 Bur #1/2 Friction Grip Made Canada 100-10/PK
Normal 0 false false false EN-US X-NONE AR-SA Genuine High Quality Carbide Burs. • Carbide Burs FG1/2 • Made by Kerr • Qty: Optional (100-20-10 pc) Friction grip shank used with high speed hand piece, ROUND, , Made in Canada The carbide burs provide the highest combination of precision ground cutting edges for consistent cutting performance The burs adhere to stringent QA standards to ensure strength, performance and durability. PRODUCT DESCRIPTION FG1/2 Carbide Burs FG1/2 Friction Grip Kerr Made in Canada 100/20/10 Burs (ROUND) ISO No. ISO Ø 1/10 (mm) Head Length (mm) Shank Type Dia/Length(mm) 1/2 007 0.7 Friction Grip 1.6/19-21 DISCLAIMER: “The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If the item is subject to FDA regulation, I will verify your status as an authorized purchaser of this item before shipping of the item.”