Galvanized Steel

New 6″ Galvanized Steel Straight Tee 6″ X 6″ X 6″ FNPT Thread

/

Product Recovery Management, Inc. (PRM) provides equipment and services to the Environmental Remediation and Landfill Gas Industries. We also serve several niche industries with customized research and development solutions. The products offered here we use in our environmental systems, so they are of absolute quality and often exceed industry standards. Even though we are an international company, we provide our customers with small business, family-operated genuine service.The success of PRM is measured by our integrity and expertise, dedicated employees, diligence, and a desire to make a difference. We appreciate your business.  *** Product Recovery Management Inc. Is Registered In and Is Therefore Required To Collect Sales Tax In The Following States: Fl, NC, NY, VA, & WY***  In no case shall Product Recovery Management, Inc. (PRM), our directors, officers, employees, affiliates, agents, contractors, interns, suppliers, service providers or licensors be liable for any injury, loss, claim, or any direct, indirect, incidental, punitive, special, or consequential damages of any kind, including, without limitation, lost profits, lost revenue, lost savings, loss of data, replacement costs, or any similar damages, whether based in contract, tort (including negligence), strict liability or otherwise, arising from the use of any service or products procured using the service, or for any other claim, related in any way to use of the service or any product, including, but not limited to, any errors or omissions in any content, or any loss or damage of any kind incurred as a result of the use of the service or any content (or product) posted, transmitted, or otherwise made available via the service. Listing and template services provided by inkFrog

10 Pack 6×6 Post Base Brackets Wood Post Fence Post Anchor Galvanized Steel US

/

? STRONGER SUPPORT FOR OUTDOOR PROJECTS: Upgraded with thicker 2mm steel and a reinforced bend, this heavy-duty 6×6 post base offers superior stability and uplift resistance compared to standard brackets. Build with confidence—it’s the ideal choice for securing your deck post, pergola post bracket, or porch post support against strong winds and heavy loads. ? SECURE FIT FOR NOMINAL 6X6 LUMBER: This wood post anchor is designed specifically for standard nominal 6×6 lumber (actual internal opening: 5.5″ x 5.5″). Note: If you are using true rough-cut lumber, light sanding of the wood edges may be required to fit. ? STANDARD 1″ STANDOFF: The built-in 1-inch raised design keeps your wood post off the concrete and away from pooling water. This code-compliant standoff post base effectively helps.

EZ Twist 3″ (2 7/8″ OD) x 9 Gauge Preformed Galvanized Steel Fence Ties – 100…

/

All Products | DF Supply, Inc. Product Information ” alt=”” /> ” alt=”” /> ” alt=”” /> Click on the Image to Enlarge zoom_in ” alt=”” /> ” alt=”” /> ” alt=”” /> EZ Twist 3″ (2 7/8″ OD) x 9 Gauge Preformed Galvanized Steel Fence Ties – 100… Model: EZTT3X9 Key Features: Designed to fit 3″ (2 7/8″ OD) fence posts Pack Size: 100 fence ties Made from high-quality and durable 9-gauge steel that has been galvanized to prevent rusting EZ Twist 3″ (2 7/8″ OD) x 9 Gauge Preformed Galvanized Steel Fence Ties – 100… Product Details Product Details These easy-to-use Fence Ties are made of sturdy steel coated with a galvanized finish to secure one fence picket to a post. They are pre-shaped to fit around posts measuring 3″ (2 7/8″ OD) with ease, making the remaining action of twisting the ties together more straightforward and requiring less effort from you. This product meets government-issued specifications, including ASTM, Federal Bureau of Prisons, Army Corps of Engineers, Federal Aviation Administration, and state and local correctional facilities. These EZ Twist Fence Ties are ideal for most commercial, industrial, and military-grade fencing projects and are guaranteed to keep your fence sturdy and tamper-proof.

3/16″ COATED PVC GALVANIZED STEEL CABLE METAL WIRE ROPE 1ft-75ft (Clear, Yellow)

/

CABLE SPECIFICATION1-75 feet, Vinyl Coated Galvanized Steel Cable WireJacket Color: Clear, YellowOuter Diameter: 3/16 inches with coatingCore Diameter: 1/8 inches galvanized steelMaximum Tensile Strength: 1700 lbsRefers to federal RR-W-410H specificationCable End Configuration: Looped on both ends with aluminum sleeve*** Length indicated on this listing is measured from the end of the loop(s) ***IMPORTANT INFORMATIONMaximum Tensile Strength ratings are listed for comparison purposes only. Actual operating loads may vary, but should never exceed recommended design factor or 12% of maximum tensile strength. These cables are not designed for overhead lifting or aircraft use; never exceed working load limit. maximum tensile strength is not considered safe working load limit. PHAT SATELLITE INTL assumes no responsibility for the use, misuse, or misapplication of its products. Products are sold with the specific understanding that the purchaser and/or user are thoroughly familiar with their proper use. We recommend buyer to consult with a licensed engineer for proper usage safety.***DUE TO CUSTOMIZATION AND SAFETY RISKS THIS ITEM CANNOT BE RETURNED***Working Load Limit (WLL) – The Working Load Limit is the maximum load which should ever be applied to the cable, even when new or when the load is evenly distributed – straight line pull only. Avoid side loading. All ratings are based upon regular environmental conditions; conditions; attention must be given to unusual conditions such as severe temperature, chemical solutions or vapors, prolonged immersion in salt water, etc. Proof Test Load (Proof Load) – The term “Proof Test” assigns a quality control test applied to the product for exclusive function of exposing flaws in material or build. The Proof Test Load (normally 2x the WLL) is load which the cable underwent & sustained without malformation when new and under laboratory test conditions. The Proof Test Load does not mean that the WLL should ever be exceeded.Breaking Strength – Breaking Strength is the average force at which the wire rope, in the condition it would leave the factory, has been found by representative testing to break, when a constantly increasing force is applied in direct line to the product at a uniform rate of speed on a stander pull testing machine. Proof testing to twice the WLL does not apply to hand-spiced slings. Remember: Breaking Strength, when published, where obtained under controlled laboratory conditions. Listing the Breaking Strength does not mean the Working Load Limit should ever be exceeded. Do not use breaking strength as a criterion for ser vice or design purposes. Refer to the Working Load Limit instead.Design Factor – An industry term usually computed by dividing the Breaking Strength by the WLL and generally expressed as a ration (ex: 7:1).Shock Load – A load resulting from rapid change of movement, such as impacting, jerking or swinging of a stack load. Sudden release of tension is another form of shock loading. Shock loads are generally significantly greater than static loads. Any shock loading must be considered when selecting the item for use in a system. Avoid shock loads as they may exceed the Working Load Limit.

Sandbaggy 1/2″ x 6″ Threaded Concrete Anchor L-Bolts – Hot Dipped Galvanized

/

Secure Base Plates & Sill Plates To Your Concrete Foundations! Whether you’re a DIY enthusiast or a seasoned professional, our 1/2″ x 6″ Threaded Concrete Anchor Bolts provide a reliable solution for attaching base plates and sill plates to concrete foundations. They are also suitable for securing signage, lightweight post bases, and general anchorage to concrete applications. These Hot Dipped Galvanized L-Bolts (may also be called J-Bolts), offer superior corrosion resistance and are designed for use with treated lumber. They feature clean threads for effortless installation. Nuts and washers are included! Please Note* Bolt Diameter Nominal – 1/2″ Actual – 7/16″ Nuts and washers are included. Sandbaggy carries a variety of concrete forming supplies. Specs Bolt Length: 6 inch Bolt Diameter: 1/2 inch Hook Length: 1-1/4 inch Thread Length: 1-3/4 inch Thread Pitch: 1/2″-13 Thread Designation: Male / External Material: Steel Grade (Steel): 36 Coating: Hot Dipped Galvanized Washer and Nuts Included: Yes Meets ASTM ASTM A307 or F1554, Grade 36 Specs ASTM A153, Class C or ASTM F2329 Specs Features Essential for Base or Sill Plate Installation: Ideal for attaching base plates and sill plates to new concrete foundations. These concrete fasteners are ideal for various wood or concrete projects Anchoring for Concrete-Based Projects: Ideal for lightweight post bases, poles, signage, and other structures built on concrete. Whether you are a construction professional or a DIY enthusiast, these L-bolts are great for general concrete anchoring. Washer and Nuts Included for a hassle-free installation! L-shaped bolt with male threads for secure nut and washer attachment. Hot-Dipped Galvanized for Max Protection: More resistant to corrosion than common electro galvanized coating, these concrete anchor bolts remain durable in outdoor settings and are suitable for use with treated lumber. Cleaner Threads for Effortless Installation: Our threaded anchor bolts feature a smooth, ASTM A153-compliant galvanized coating for easy nut tightening and a secure connection. Recommended For Use With Treated Lumber FAQ Types of anchor bolts for concrete? There are a variety of types of anchor bolts for concrete, here’s a summary of some of the different types: Wedge Anchors: Consists of tapered end with an expansion clip, wedging into the concrete as it is tightened. Sleeve Anchors: Consist of a metal sleeve, a nut, and a bolt. Once tightened, the sleeve expands into the concrete, resulting in a reliable and secure hold. L-Shaped Anchor Bolts (also known as concrete bent anchor bolts or cement anchor bolts), they are identified with the 90-degree bend at one end and are generally embedded in wet concrete. Strike Anchors: One-piece anchors that are hammered directly into pre-drilled concrete holes. These anchors have internal threads. Drop-In Anchors: Dropped into a pre-drilled hole and requires a setting tool to secure into the concrete.

PLP Galvanized Steel Preformed Tree Grip / Dead End, 3/16″ (RED), Made in USA

/

Used For Termination of 1×7 Construction Guy Strand Cable, size 3/16″ Preformed Line Products 3/16″ TREE-GRIP™ Dead-endDesigned for use in Tree Cabling Systems.Used to form a termination on the end of guy strand.Use of heavy duty thimbles with Dead Ends is recommended.For use with 1 x 7 Guy Strand only.Weight .15 lbs/eaCAUTION: DO NOT EXCEED WORKING LOAD LIMIT OR 20% OF THE PRODUCT’S BREAKING STRENGTH. Pambina ImpEx assumes no responsibility for the use, misuse or misapplication of its products. Products are sold with the specific understanding that the purchaser and/or user are thoroughly familiar with their proper use.

A Trentini Distribuidora é sua escolha de confiança para peças de automóveis nacionais e importados.

Nos siga nas redes sociais

Facebook Linkedin Instagram

Menu

Links Úteis

Copyright© 2026 Trentini Distribuidora, Todos os direitos reservados | Desenvolvido por 273+ Criativa

Rolar para cima